| Εικόνα Προϊόντος |
Ονομα Προϊόντος - |
Τιμή |
 |
Product: Illustration: Package: Instruction: Specification: ●Specifically designed for 450 class helicopters, this swashplate leveler allows for precise swashplate level adjustment, improving helicopter hover... |
8.00€
|
 |
Product: Product: Product: Package: Instruction: Specification: ●This swashplate leveler allows for precise swashplate level adjustment, improving helicopter hover stability and flight performance. ●Tailored... |
11.00€
|
 |
Product: Illustration: Package: Instruction: Specification: ●Specifically designed for 500 class helicopters, this swashplate leveler allows for precise swashplate level adjustment, improving helicopter hover... |
9.00€
|
 |
Product: Product: Product: Product: Product: Package: Instruction: Specification: ●Specifically designed for 550-800 class helicopters, this swashplate leveler allows for precise swashplate... |
10.00€
|
 |
Instructions: Specification: Introduction: Developed by the R&D team in Align, the new AP800 digital pitch gauge is suitable for flybar and flybarless helicopters. Auto-detecting Horizontal level , with result displayed through high... |
32.00€
|
 |
Product: Package: Instruction: Specification: ●Fuel filter x 1(3-Way) ● Filter mesh x 1(Φ5.2xΦ7x19.5mm) ●Fuel tube clip B x 1(33.5x9.8x3mm) |
5.00€
|
 |
Instructions: Specification: · 6061-T6 Aluminum alloy material and CNC processed · Using on T-REX 450pro / 450sport / 500. · Feathering Shaft Wrench(Φ4xΦ8x6mm,Φ6xΦ10x12mm) x 1 |
15.00€
|
 |
Instructions: Specification: · 6061-T6 Aluminum alloy material and CNC processed · Using on T-REX 550 / 600 / 700 · Feathering Shaft Wrench(Φ8xΦ12x12mm,Φ10xΦ14x12mm) x 1 |
18.00€
|
 |
Product: Product: Product: Product: Product: Package: Instruction: Specification: ●Use for T-REX 470 / 700. ●6061-T6 Aluminum alloy material and CNC processed. ●New 470 Feathering Shaft... |
18.00€
|
 |
Instructions: Specification: · Super hard screwdriver head mady by HSS high alloy steel,wear and distortion resisting! · Purifier handle made by aluminum alloy CNC , inside can place components and screws! ... |
20.00€
|
 |
Used to size the holes in the ball link. Suitable for sizes 4.75 to 4.8 mm ball links. Improves the fit of the ball links on your linkages so that you can have a smooth and unrestricted movement on your linkages and servos. Usage: 1) Remove the... |
5.00€
|
 |
|
8.00€
|
 |
CC BEC 10A-PEAK 5-25V 2-6S LiPo Our BEC's are small devices that eliminate the need for a receiver battery pack. They draw higher voltage from the motor batteries and drop it to a volt that is suitable for your receiver and servos. This is required... |
30.00€
|
 |
Castle Creations BEC 2.0 (14S) From the trusted manufacturer of BECs comes the next generation of voltage regulators. Designed and assembled in the USA1, Castle CreationsΆ CC BEC 2.0 gives users higher voltage ranges in two unique packages. For... |
43.00€
|
 |
Castle creations BEC 2.0 Waterprotected (14S) From the trusted manufacturer of BECs comes the next generation of voltage regulators. Designed and assembled in the USA1, Castle CreationsΆ CC BEC 2.0 gives users higher voltage ranges in two unique... |
54.00€
|
 |
Castle Creations BEC Pro - One Beefy BEC! This is the CC BEC Pro High Output Switching Battery Eliminator Circuit (BEC) from Castle Creations. Includes: - CC BEC Pro High Output Switching BEC with connectors and instruction sheet... |
59.00€
|
 |
|
10.00€
|
 |
|
24.00€
|
 |
Information Might be the best quality silicone fuel tube availableFor Glow Fuel onlyWon't crack or hardenFits securely on fuel fittingPerfect size for any R/C car applicationInner diameter: 2 mmLength: 1 m |
5.00€
|
 |
Information Might be the best quality silicone fuel tube availableFor Glow Fuel onlyWon't crack or hardenFits securely on fuel fittingPerfect size for any R/C car applicationInner diameter: 2 mmLength: 1 m |
5.00€
|
 |
|
5.00€
|
 |
|
5.00€
|
 |
Information Might be the best quality silicone fuel tube availableFor Glow Fuel onlyWon't crack or hardenFits securely on fuel fittingPerfect size for any R/C car applicationInner diameter: 2 mmLength: 1 m |
5.00€
|
 |
|
5.00€
|
 |
|
6.00€
|
 |
Product description Servo tester - device for checking the correct operation of the servo. The device has the ability to check the correctness of the maximum servo axis deflection. Technical data Power supply: 4.8-6V 3 measurement... |
4.00€
|
 |
The modeler's choice for strong, sure adhesion of metal fasteners in cars, trucks, helicopters and other high-vibration applications. Medium strength, general purpose threadlocker Locks threaded fastners against vibration Parts can be... |
4.00€
|
 |
Digital Pitch Gauge This is the Helimax Digital Pitch Gauge. Features Measures the angle of main and tail rotor blades of radio control helicopters during setup Fits blades up to 2.75" (70mm) wide Measures pitch range from +/-90° Magnetic... |
18.00€
|
 |
Description: With this helicopter ball end tool, you can save time & hassle by easily threading ball links onto linkage rods without the difficulty of threading linkages manually with your fingers. Features: Enlarged knurled handle for better... |
4.00€
|
 |
Product description: made in Japan applicable to 4-5MM ball head 1. Used to join a rod end with a Φ5 ball 2.Used to out a rod end with a Φ5 ball 3. Used to hold an adjust rod when screwing an adjust rod intoarod end. 4. Used... |
35.00€
|
 |
The HiTEC infrared thermometer is a precise, non-contact measuring instrument that is safe and easy to use. Its light and compact design makes it easy to operate with one hand. The HiTEC infrared thermometer is also ideal for measuring the... |
37.00€
|
 |
Hobbywing UBEC 3A 2-6S Why do you need UBEC? The UBEC is a switch-mode DC regulator separated from ESC (ESC---Electronic Speed Controller for brushless/brushed motor), it will take high-voltage (5.5 to 26V) power from your battery pack and convert... |
9.00€
|
 |
Ming Yang 12V Electric Fuel Pump (Croc.Clip) For mounting on the outside of your flight box this economical 12v pump has a built-in forward and reverse switch & centre 'off' position. Supplied with pre-fitted crocodile clips for connection to... |
17.00€
...περισσότερα
|
 |
FEATURES: C/°F selection (in the hole of back) Auto power off after 15 seconds Specifications: Model: DT8220 Type: Pen shape Suitable for: Home use thermometer Display: 3 ½ digit LCD display Temperature range: -50C to 220C / -58°F to... |
19.00€
|
 |
|
5.00€
|
 |
|
5.00€
|
 |
|
2.00€
|
 |
Non-Contact Infrared Radiation Laser Thermometer Laser point for accuratet target aiming Red Laser Power : less than 0.5 MW backlight Measurement ranger: -32 oC ~ 380 oC ( -26 oF ~716 oF ) Accuracy: ± 2 oC / ± 2 oC Resolution:... |
45.00€
|
 |
|
8.00€
|
 |
|
9.00€
|
 |
characteristics • Ideal for compensating for dimensional differences between blade holder and rotor blade • Good resistance to acids, oils, gasoline and alkalis • Flame retardant according to DIN 4102 B1, self-extinguishing... |
0.50€
|
|
characteristics • Ideal for compensating for dimensional differences between blade holder and rotor blade • Good resistance to acids, oils, gasoline and alkalis • Flame retardant according to DIN 4102 B1, self-extinguishing... |
0.50€
|
 |
Record the speed and the track path of your model This is a really fun equipment. Put a Velcro tape on the back of the logger and put it your RC Car or RC Plane, then you get the speed data and the location data, after playing, you can cycle the... |
88.00€
|
 |
|
9.90€
|
 |
|
12.00€
|
 |
|
9.00€
|
 |
|
5.00€
|
 |
|
10.00€
|
 |
High-strength nylon ball-nose pliers with spring return. The surface of the ball head does not hurt, and feel better than the imports. High-strength materials, not easily broken, adds 450 paddle clamp screw hole design, suitable for ALIGN... |
6.00€
|
 |
Expansion Length: 21cm |
2.50€
|
 |
Product description: the Adhesive Gel is a material that possess excellent Mechanics dampening characteristics, ideal for MOUNTING gyroscopes, receivers, or other electronics in the Mechanics prone areas.The gel can be re-used by cleaning off the... |
4.00€
|
 |
|
6.00€
...περισσότερα
|
 |
Product Description: 6061-T6 aluminum CNC machining, suitable for 550/600/700/800 and other spindle diameter 10MM/12MM series models, the new independent design rubber ring positioning to bring ease of use can be precisely adjusted. Swashplate... |
8.00€
|
 |
Product Description: 6061-T6 aluminum CNC machining, suitable for 550/600/700/800 and other spindle diameter 10MM/12MM series models, the new independent design rubber ring positioning to bring ease of use can be precisely adjusted. Swashplate... |
8.00€
|
 |
Product Description: 6061-T6 aluminum alloy precision CNC multi-axis machining, independent design suitable for crab claw copper sleeve balanced side diameter : 3.1MM/3.5mm/4.0mm/4.3mm/5.5mm/6.2mm and M3 slip Nuts demolition, corresponding... |
6.00€
|
 |
|
2.50€
|
 |
Product description: for the demolition of 450 the TAROT sections of the detachable swashplate, to precisely regulate the fish-eye bearing tightness to meet the players personalized requirements. Product Specifications: metal... |
7.00€
|
 |
|
19.00€
|
 |
Turnigy Heli-Tach 3600 Optical Tachometer 1000~3600RPM The new Turnigy Heli-Tach 3600 is here! Finally, there is an optical heli-tach available that wont break the bank. Despite the low price, this is a quality unit that will provide you with... |
24.00€
|
