| Εικόνα Προϊόντος |
Ονομα Προϊόντος - |
Τιμή |
 |
|
12.00€
|
 |
|
28.00€
...περισσότερα
|
 |
|
29.00€
|
 |
FrSky F3 FC Built-in XSR receiver +OSD (EU VERSION) FrSky XSRF3O Flight Controller Integrate with FrSky XSR Receiver Built-in F3 and XSR receiver module ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a full... |
49.00€
|
 |
FrSky F3 FC Built-in XSR receiver +OSD+ PDB (EU VERSION) Built-in F3 and XSR receiver module ● Built-in onboard PDB up to 6S integrate with current sensor ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a... |
59.00€
|
 |
FrSky F4 FC Built-in XSR receiver +OSD+ PDB (EU VERSION) Built-in F4 and XSR receiver module ● Built-in onboard PDB up to 6S integrate with current sensor ● Features the latest Accelerometer and Gyro technology. ● XSR receiver is a... |
69.00€
|
 |
Hyperion 4mm Flange Lock Nut Set, Blue (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
3.50€
|
 |
Hyperion 4mm Flange Lock Nut Set, Green (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
3.50€
|
 |
Hyperion 4mm Flange Lock Nut Set, Red (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
3.50€
|
 |
Hyperion 4mm Flange Lock Nut Set, Yellow (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
3.50€
|
|
Hyperion 5mm Flange Lock Nut Set, Blue (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
4.00€
|
|
Hyperion 5mm Flange Lock Nut Set, Green (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
4.00€
|
|
Hyperion 5mm Flange Lock Nut Set, Yellow (Low Profile) Stop your props from flying off with low height profile flange lock nuts! Our Hyperion high-quality anodized aluminum lock nuts are custom ordered for a low profile height. Typical flange nuts... |
4.00€
|
 |
Hyperion XT60 Battery Indicator Caps (Full, Store, Empty)-3 sets Protect your Lipo batteries and also know their status instantly. Now no more worries with these bright colored silicone caps that fit your XT60 connectors perfectly. Made from High... |
3.00€
|
 |
ImmersionRC Branded 5.8GHz Antenna |
13.00€
|
 |
ImmersionRc Uno 5800 Nexwave A/V 5.8Ghz Receiver High performance A/V Receiver for use on the 5.8GHz ISM band. -90dBm typical sensitivity 5.8GHz 'Uno' receiver Frequencies (Airwave): 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz,... |
72.00€
|
 |
Main control board (DEVO-M) |
175.00€
|
 |
The Matek super lightweight and compact Lost Model Beeper is powered by an onboard MCU which enables it to output a louder sound than most 5V active buzzers. The lost model beeper can be used on traditional PWM receivers or racing flight... |
6.00€
|
 |
|
10.00€
|
 |
|
5.70€
|
 |
|
4.50€
|
 |
|
5.70€
|
 |
|
5.70€
|
 |
|
5.70€
|
 |
Product Description CC3D openpilot flight controller is applicable to Tarot mini 200/250/300 FPV Kit. Includes shock absorber tape and 3 silicone connect wires (8Px1, 4Px2) Open pilot official website: http://www.openpilot.org/ Specification: ... |
25.00€
|
 |
Product Description ： NANO 12A ESC is based on BLHELI firmware, with nice throttle linearity and high quality. Designed for multi-copter, fixed-wing, and heli-copter. With low-voltage safe, over-temperature safe, and failsafe. Parameters are... |
16.00€
|
 |
|
14.00€
|
 |
Product Description Applicable to TAROT mini 200/250/300 FPV kits. The circular polarization antenna is pure copper, feeder line, and SMA connector applied. The antenna weight is 7.8G only. Output frequency: 5800MHZ TX antenna: 3-leaf RX antenna:... |
8.00€
|
 |
|
6.00€
|
 |
|
6.00€
|
 |
Product Description ： Applicable to Tarot mini 250/300 and FPV flight. Chinese/English selectable With built in barometer sensor and GPS module There is preserved assembly hole on Tarot mini 250/300 kit for OSD. Tarot OSD is equipped... |
42.00€
|
 |
Product Description : TAROT mini 520TVL FPV lens is a 120 degree wide angle lens, applicable to Tarot mini 200/250/300 and FPV flight. With built-in voltage regulator module, it can connect to 2S-3S 5V-12V battery. Red : DC 5V-12V power input... |
45.00€
|
 |
Product Description : RunCam HD lens provide 1080Px 720p image resolution. It decreases the RF noise and interferences, provides FPV enthusiasts with higher quality results on Full HD.1/3ΆΆ Aptina AR0330 CMOS: 3.0 mega pixcelDSP: Novatek... |
89.00€
|
 |
Product Description: Light weight, mini size. Specific for long distance AV transmission. Applicable to most 5.8G transmitters with 8-32 channels 1 Video output + 2 Audio output Equipped with 5V1A power output; please confirm the current and... |
72.00€
...περισσότερα
|
 |
Product Description ： Tarot 5.8G 300mW RX is with small size and light weight. 6061T6 aluminum alloy case applied, designed for small-sized racing drone. 1 Video output + 2 Audio output Specifications: Weight: 17.2 G (without antenna)... |
35.00€
|
 |
Upgrade tool |
20.00€
|
 |
Walkera Video cable for GoPro |
4.00€
|
