STEAM (HOT100006-1) Mini Digital Inclinometer/Pitch Measuring Instrument

  • Model: HOT100006-1
  • Βάρος Μεταφοράς: 0.2 Kg
  • Κατασκευαστής: STEAM
  • Διαθεσιμότητα stock level

32.00€

Προσθήκη στο Καλάθι:

 

It is applicable for measuring the Angle
of helicopter rotors with a blade root thickness of
5mm/8mm/10mm/12mm/14mm/[with a blade root thickness of 2.5mm-5mm and an
installation hole ≥M2.5]. The metal parts are processed by
high-precision five-axis CNC using 6061T6 aluminum alloy.
The digital display inclination box at
the top has a magnetic adsorption measurement surface function. With two
measurement angles, it can switch between two units of slope and Angle
with one click. It is equipped with Type-C charging cable and has
charging function. There is no need to worry about battery failure
during use anymore. LCD liquid crystal high-definition display with
backlight function, allowing for clear visibility even in direct
sunlight.

This mini digital inclinometer/pitch measuring instrument HOT100006 can measure the Angle of the tail blade.

(When measuring the Angle of the tail blade, the horizontal bubble should be placed horizontally.)

Before use, place the bottom surface of
the pitch gauge on the motor or other relatively flat parts of the
helicopter first. When the device is turned on, briefly press the power
button at the top of the digital display tilt box. The number on the
screen will change to "0.00" and the character "REF" will be displayed.
If the main rotor is being measured, then
add or remove metal sheets according to the thickness of the rotor root
and insert the metal parts into the main rotor holder. The obtained
Angle value is the pitch Angle.
If the rotor being measured is the tail
rotor, the metal parts at the bottom should be removed first to reduce
the weight and minimize the interference it causes.
Choose the M2.5 or M3 hole position according to the installation hole of the blade root, select the corresponding screws, remove the incompatible screws, insert the back of the L-shaped bottom plate into the tail rotor holder, and tighten the screws.

Specification：

Digital display tilt Angle box（36.0×36.0×20.0mm）×1

L-shaped base plate（27.0×29.0×29.0mm）×1

Metal Part（48.0×26.0×8.0mm）×1

Metal Part（30.0×22.0×2.0mm）×3

M3.0×10mm Screw×1

M3.0×28mm Screw×1

M3.0 Nut×1

M3.0×5mm Screw×2

M2.5×8mm Screw×1

M3.0×10mm Screw×1

Washer（Φ3.0×Φ6.0×0.25mm）×2

Magnet（Φ4.0×12.0×2.0mm）×1

bubble level ×1

USB Cable×1

 

Πελάτες που αγόρασαν αυτό το προϊόν αγόρασαν επίσης...

(image for) TAROT (TL2756-02) XT60 male to T plug female
TAROT (TL2756-02) XT60 male to T plug female
2.50€
(image for) PELIKAN Hook-and-loop doublesided tape 10x2000mm blue
PELIKAN Hook-and-loop doublesided tape 10x2000mm blue
4.00€
(image for) Futaba Bag Soft smal 250x210x115mm
Futaba Bag Soft smal 250x210x115mm
32.00€
(image for) M-DRIVE Cleaning Brush Set - 18 & 26mm
M-DRIVE Cleaning Brush Set - 18 & 26mm
8.00€
(image for) 04-FOOTER CENTER - athletic goods